Inaccessible Meter Box / Missing Termite Treatment History
Inaccessible Meter Box / Missing Termite Treatment History is a low-severity termite defect SURE inspectors have documented across 6 inspection reports.
Causes
- Lack of record-keeping by previous owners
- Lack of access provided
- Locked meter box
- Meter box locked
Symptoms to look for
- Inability to verify the presence or details of a termite treatment notice
- Increased risk due to lack of information on past management
- Absence of information regarding past termite treatments
- Absence of visible durable notice for termite treatment
- Inability to check for durable notice
Remedies
- Consider arranging for a new termite treatment in accord with Australian Standard 3660 to reduce risk of further attack
- Engage a pest control technician to review the termite site management plan and complete annual inspection/management
- Obtain copies of all paperwork regarding previous treatments and inquire about quality and warranty information
- Request treatment history from the seller or contact the treatment company mentioned on any durable notice
- Request treatment history from the seller or contact the treatment company on the durable notice
Worth asking our inspector about this specifically.
This is common across Perth stock and usually fixable without drama, but the scope of the fix varies. Every SURE inspection includes 12 months of free advice. Call out the defect by name and we check for it directly.
Curated entries in Termite
- Curated 2–4/5Slab Edge Concealed by Soil, Paving, or Raised Garden Beds
I walked the perimeter and could not see a continuous strip of exposed slab edge - raised garden beds, soil, paving, or decorative stone have buried it. Reference: AS 3660.1 and AS 3660.2. In my experience a concealed slab edge lets subterranean termites bridge the edge barrier out of sight, entering the cavity or framing without leaving mud leads where I can find them.
- Curated 1–4/5Mulch and Garden Beds Against House
Organic mulch and irrigated garden beds placed directly against the external walls create a moisture-rich, cellulose-rich environment that is attractive to subterranean termites and conceals the slab edge from visual inspection. AS 3660.1 and AS 3660.2 identify direct contact between landscaping materials and the structure as a conducive condition requiring correction.
- Curated 1–5/5Timber in Contact with Ground
Timber structural elements - deck posts, pergola framing, sleeper retaining walls, or firewood stacks - sitting directly in or against soil create an unobstructed termite pathway into the building and accelerate fungal decay. AS 3660.1 requires all structural timber to be isolated from soil to maintain a visible inspection zone; ground contact eliminates this requirement entirely and removes any chance of early detection.
- Curated 1–4/5High Termite Risk Due to Environmental Surrounds
The property's location near large trees, bushland, or parkland places it in elevated termite territory. Proximity to established timber sources and native vegetation significantly increases foraging pressure on nearby structures, and AS 3660.1 recognises environmental context as a primary risk factor when specifying termite management requirements.
- Curated 1–4/5Concealed Internal Wall Areas (Termite Risk)
Internal wall cavities, top plates in the roof space, and sub-floor framing cannot be visually inspected during a standard building inspection. AS 4349.3 requires inspectors to report whenever access limitations prevent verification of timber condition - these concealed zones are where termite activity most commonly goes undetected until structural damage is advanced.
- Curated 1–4/5Tree Stumps on Site
Tree stumps left in the ground provide an established food source and potential nesting site for subterranean termites. Once a colony is established in a stump, foraging extends radially - typically 50–100 m - placing any timber-framed structure on the property within reach.