Lack of Termite Management Program
Lack of Termite Management Program is a moderate-severity termite defect SURE inspectors have documented across 8 inspection reports.
Causes
- Absence of a documented or active termite management program
- Lack of historical or current termite protection measures
- Oversight by strata management
- Lack of historical implementation by strata
- Lack of historical or ongoing management by strata
Symptoms to look for
- No evidence or details of a current termite management program
- No evidence or documentation of a current termite management program
- Absence of documented termite management plan or treatment records
- Absence of a management program as per AS 3660
- Absence of current termite protection measures
Remedies
- If no program is in place, implement a management plan in accordance with AS 3660
- Contact Strata to obtain details of any existing management program
- Contact Strata to confirm the status of any existing program
- If none, implement a management plan as per AS 3660
- Contact Strata Management to obtain details of any existing program
Worth asking our inspector about this specifically.
This is common across Perth stock and usually fixable without drama, but the scope of the fix varies. Every SURE inspection includes 12 months of free advice. Call out the defect by name and we check for it directly.
Curated entries in Termite
- Curated 2–4/5Slab Edge Concealed by Soil, Paving, or Raised Garden Beds
I walked the perimeter and could not see a continuous strip of exposed slab edge - raised garden beds, soil, paving, or decorative stone have buried it. Reference: AS 3660.1 and AS 3660.2. In my experience a concealed slab edge lets subterranean termites bridge the edge barrier out of sight, entering the cavity or framing without leaving mud leads where I can find them.
- Curated 1–4/5Mulch and Garden Beds Against House
Organic mulch and irrigated garden beds placed directly against the external walls create a moisture-rich, cellulose-rich environment that is attractive to subterranean termites and conceals the slab edge from visual inspection. AS 3660.1 and AS 3660.2 identify direct contact between landscaping materials and the structure as a conducive condition requiring correction.
- Curated 1–5/5Timber in Contact with Ground
Timber structural elements - deck posts, pergola framing, sleeper retaining walls, or firewood stacks - sitting directly in or against soil create an unobstructed termite pathway into the building and accelerate fungal decay. AS 3660.1 requires all structural timber to be isolated from soil to maintain a visible inspection zone; ground contact eliminates this requirement entirely and removes any chance of early detection.
- Curated 1–4/5High Termite Risk Due to Environmental Surrounds
The property's location near large trees, bushland, or parkland places it in elevated termite territory. Proximity to established timber sources and native vegetation significantly increases foraging pressure on nearby structures, and AS 3660.1 recognises environmental context as a primary risk factor when specifying termite management requirements.
- Curated 1–4/5Concealed Internal Wall Areas (Termite Risk)
Internal wall cavities, top plates in the roof space, and sub-floor framing cannot be visually inspected during a standard building inspection. AS 4349.3 requires inspectors to report whenever access limitations prevent verification of timber condition - these concealed zones are where termite activity most commonly goes undetected until structural damage is advanced.
- Curated 1–4/5Tree Stumps on Site
Tree stumps left in the ground provide an established food source and potential nesting site for subterranean termites. Once a colony is established in a stump, foraging extends radially - typically 50–100 m - placing any timber-framed structure on the property within reach.