Uninspected Roof Space (Termite Risk)
Uninspected Roof Space (Termite Risk) is a high-severity termite defect SURE inspectors have documented across 4 inspection reports.
Causes
- Insulation, sarking, and stored items obstructing access within the roof void
- Obstructions (insulation, sarking, storage) in the roof void
- Cathedral/Raked ceiling design and low clearance
- Presence of insulation obstructing view
- Obstructions in the roof void
Symptoms to look for
- Concealed areas with potential for hidden termite activity or damage
- Roof space timbers not fully visible or accessible for inspection
- Inability to fully inspect timbers in the roof void
- High risk of concealed termite activity/damage
- Limited access to roof space perimeter
Remedies
- Obtain written approval from owner to remove roof cover sections to enable a complete full inspection
- Obtain written approval to move obstructing items to enable a complete full inspection
- Obtain written approval from the owner to move obstructing items
- Conduct a complete, full inspection of the roof space timbers
- Move insulation to allow full visual inspection for defects
Get an inspector through this property.
Findings in this category skew high severity. If you are under contract, we can usually book inside the cooling-off window. Every inspection includes 12 months of free advice.
Curated entries in Termite
- Curated 2–4/5Slab Edge Concealed by Soil, Paving, or Raised Garden Beds
I walked the perimeter and could not see a continuous strip of exposed slab edge - raised garden beds, soil, paving, or decorative stone have buried it. Reference: AS 3660.1 and AS 3660.2. In my experience a concealed slab edge lets subterranean termites bridge the edge barrier out of sight, entering the cavity or framing without leaving mud leads where I can find them.
- Curated 1–4/5Mulch and Garden Beds Against House
Organic mulch and irrigated garden beds placed directly against the external walls create a moisture-rich, cellulose-rich environment that is attractive to subterranean termites and conceals the slab edge from visual inspection. AS 3660.1 and AS 3660.2 identify direct contact between landscaping materials and the structure as a conducive condition requiring correction.
- Curated 1–5/5Timber in Contact with Ground
Timber structural elements - deck posts, pergola framing, sleeper retaining walls, or firewood stacks - sitting directly in or against soil create an unobstructed termite pathway into the building and accelerate fungal decay. AS 3660.1 requires all structural timber to be isolated from soil to maintain a visible inspection zone; ground contact eliminates this requirement entirely and removes any chance of early detection.
- Curated 1–4/5High Termite Risk Due to Environmental Surrounds
The property's location near large trees, bushland, or parkland places it in elevated termite territory. Proximity to established timber sources and native vegetation significantly increases foraging pressure on nearby structures, and AS 3660.1 recognises environmental context as a primary risk factor when specifying termite management requirements.
- Curated 1–4/5Concealed Internal Wall Areas (Termite Risk)
Internal wall cavities, top plates in the roof space, and sub-floor framing cannot be visually inspected during a standard building inspection. AS 4349.3 requires inspectors to report whenever access limitations prevent verification of timber condition - these concealed zones are where termite activity most commonly goes undetected until structural damage is advanced.
- Curated 1–4/5Tree Stumps on Site
Tree stumps left in the ground provide an established food source and potential nesting site for subterranean termites. Once a colony is established in a stump, foraging extends radially - typically 50–100 m - placing any timber-framed structure on the property within reach.