Combined Building & Pest Inspection in Tapping
Professional combined building & pest inspection by your local SURE inspector in Tapping. Two inspections in a single visit, structural assessment and timber pest detection under one report.
What's in your combined building & pest inspection
Included
- Full structural building inspection
- Termite and timber pest detection
- Moisture meter and thermal imaging (where deemed required)
- Roof and sub-floor inspection
- Combined written report with photo evidence
- 12 months FREE follow-up advice
Our inspectors document every accessible element on site with photo evidence and severity ratings.
Local context for Tapping
- External Wall Cracking due to Settlement
- Trees in Close Proximity to Dwelling
- Bedroom 2 Ceiling/Cornice Join Crack
Defects our combined building & pest inspections
commonly flag in Tapping
Based on 27 SURE inspections carried out in the Tapping.
- 07
- 08
- 13
- 14
- 18Cracked Roof Mortar25.9%
- 20Tree Stumps on Site25.9%
- 30Eave Lining Stains18.5%
Anonymised at suburb level · Minimum 5 inspections per published stat · No individual property identified · 12 months FREE advice on every report
Meet your inspector in Tapping
About combined building & pest inspection
What does a combined building and pest inspection cover?
It combines a structural building inspection (AS 4349.1-2007 Annexure A) and a timber pest inspection (AS 4349.3-2010) in one visit and one report. The inspector checks the roof frame, subfloor, external site timbers, load-bearing walls, slab and footings, pergola and other timbers, and carries out moisture testing.
Why combine building and pest inspections?
A combined inspection satisfies pre-purchase due diligence by covering both termite and structural risk in a single visit. You get one report covering both scopes, with pricing confirmed before booking.
Is a combined inspection as thorough as two separate inspections?
Yes. Our inspectors are qualified to conduct both assessments and follow the same standards — AS 4349.1-2007 for building and AS 4349.3-2010 for timber pest. You get the full scope of each.
How long does a combined inspection take?
A combined building and pest inspection typically takes 1–2 hours on site, depending on the size and age of the property.
When will I get the report?
Same-day reports are standard — usually within 5 hours, subject to access. The inspector calls you on completion to walk through the findings, and you're welcome to ask questions for 12 months afterward.
Do I need to attend the inspection?
There's no need to attend. We arrange the timing with the agent or seller and attend only with their permission. The inspector phones you when finished to explain what was found.
How is the property assessed?
The building is compared to a similar-age, well-maintained building of the same type. That gives you a fair, like-for-like picture of its condition rather than holding an older home to the standard of a new build.
Other inspections in Tapping
Pre-Purchase Structural Building Inspection in Tapping
Structural pre-purchase building inspection per the contract of sale. Same-day reports sub...
Pre-Purchase Timber Pest Inspection in Tapping
Timber pest inspection for termites, borers and fungal decay. AS 4349.3 compliant reports....
Real defects our inspectors have flagged
Built to last. Inspected to be SURE.
One inspection, twelve months of advice, and the same person on the other end of the phone every time you call. That is the part you do not see on the brochure.
9,237 inspections · 242,618 defects found · Inspector-owned franchises