Defect type
·131 observations
High · 2–4/5
Damaged Power Point
Damaged Power Point is a high-severity electrical defect SURE inspectors have documented across 121 inspection reports.
Causes
- Unspecified, likely wear and tear or improper installation/fixing
- Poor installation or finish around electrical outlet
- Cover removed and not replaced
- Unknown (e.g., impact, wear)
- Unspecified electrical fault
Symptoms to look for
- Exposed electrical components at power point
- Power point/s were noted to be damaged
- Active and neutral incorrectly wired
- Power point/s were noted to be loose
- Visible damage to power point cover
Remedies
- Engage an electrician to repair.
- Engage a licensed electrician for repairs.
- Engage an electrician for replacement
- Engage an electrician for repairs
- Rectify gap around power point
Critical
Get an inspector through this property.
Findings in this category skew high severity. If you are under contract, we can usually book inside the cooling-off window. Every inspection includes 12 months of free advice.
Inspector-written
Curated entries in Electrical
- Curated 3–5/5Exposed Electrical Wiring in Accessible Area
Electrical wiring not properly enclosed in conduit or behind wall linings in areas accessible to occupants, including subfloor spaces, garages, and laundries. Presents shock hazard and does not comply with AS/NZS 3000 wiring rules.
- Curated 2–5/5Non-Compliant or Overloaded Switchboard
Switchboard not meeting current AS/NZS 3000 requirements, including missing RCDs (safety switches), overcrowded circuits, or outdated ceramic fuses. Common in pre-2000 Perth and Sydney homes that have not been upgraded.
Same category