Non-Operating Ceiling Light
Non-Operating Ceiling Light is a critical electrical defect SURE inspectors have documented across 316 inspection reports. Highest concentration in Ellenbrook.
Causes
- Electrical wiring issue.
- faulty wiring
- Electrical fault in wiring or fixture
- Faulty bulb or electrical issue
- Blown bulb or electrical fault
Symptoms to look for
- Ceiling fan not operating correctly
- Light did not operate when tested
- Light fixture does not illuminate
- Ceiling light does not turn on.
- Light does not illuminate
Remedies
- If still not operating, engage an electrician for repairs.
- if failure continues, engage an electrician for repairs
- If failure continues to occur, engage an electrician for repairs
- Engage an electrician for repairs if failure continues to occur
- If failure continues to occur engage an electrician for repairs
Where we see this most
These suburbs show the highest concentration of non-operating ceiling light in our inspection data (minimum five observations). Click a suburb to see its full defect profile.
Get an inspector through this property.
Findings in this category skew high severity. If you are under contract, we can usually book inside the cooling-off window. Every inspection includes 12 months of free advice.
Curated entries in Electrical
- Curated 3–5/5Exposed Electrical Wiring in Accessible Area
Electrical wiring not properly enclosed in conduit or behind wall linings in areas accessible to occupants, including subfloor spaces, garages, and laundries. Presents shock hazard and does not comply with AS/NZS 3000 wiring rules.
- Curated 2–5/5Non-Compliant or Overloaded Switchboard
Switchboard not meeting current AS/NZS 3000 requirements, including missing RCDs (safety switches), overcrowded circuits, or outdated ceramic fuses. Common in pre-2000 Perth and Sydney homes that have not been upgraded.