Non-operational Oven Light
Non-operational Oven Light is a high-severity electrical defect SURE inspectors have documented across 747 inspection reports. Highest concentration in Ellenbrook.
Causes
- electrical fault
- Electrical installation incomplete or faulty wiring.
- Power was not operating to the ground floor.
- Electrical fault within the appliance
- Faulty bulb or electrical issue
Symptoms to look for
- Lights on the ground floor do not turn on.
- External wall light not turning on
- External wall light not operating
- Loose external wall light fixture
- Exhaust fan light not turning on
Remedies
- If failure continues, engage an electrician for repairs.
- Replace bulb and retest.
- Investigate and rectify the electrical issue to make ground floor lighting operational.
- Replace bulb and retest; if failure persists, engage an electrician for repairs
- If failure continues to occur, engage an electrician for repairs
Where we see this most
These suburbs show the highest concentration of non-operational oven light in our inspection data (minimum five observations). Click a suburb to see its full defect profile.
Get an inspector through this property.
Findings in this category skew high severity. If you are under contract, we can usually book inside the cooling-off window. Every inspection includes 12 months of free advice.
Curated entries in Electrical
- Curated 3–5/5Exposed Electrical Wiring in Accessible Area
Electrical wiring not properly enclosed in conduit or behind wall linings in areas accessible to occupants, including subfloor spaces, garages, and laundries. Presents shock hazard and does not comply with AS/NZS 3000 wiring rules.
- Curated 2–5/5Non-Compliant or Overloaded Switchboard
Switchboard not meeting current AS/NZS 3000 requirements, including missing RCDs (safety switches), overcrowded circuits, or outdated ceramic fuses. Common in pre-2000 Perth and Sydney homes that have not been upgraded.