External Light Failure
External Light Failure is a low-severity electrical defect SURE inspectors have documented across 3 inspection reports.
Causes
- Electrical wiring issue
- Fixture malfunction
- Burnt-out bulb
- Faulty wiring
- Fixture fault
Symptoms to look for
- External light does not operate
- Light does not turn on
Remedies
- If failure continues, engage an electrician for repairs
- Engage an electrician if failure persists
- Replace bulb and retest
- Replace bulbs
Worth asking our inspector about this specifically.
This is common across Perth stock and usually fixable without drama, but the scope of the fix varies. Every SURE inspection includes 12 months of free advice. Call out the defect by name and we check for it directly.
Curated entries in Electrical
- Curated 3–5/5Exposed Electrical Wiring in Accessible Area
Electrical wiring not properly enclosed in conduit or behind wall linings in areas accessible to occupants, including subfloor spaces, garages, and laundries. Presents shock hazard and does not comply with AS/NZS 3000 wiring rules.
- Curated 2–5/5Non-Compliant or Overloaded Switchboard
Switchboard not meeting current AS/NZS 3000 requirements, including missing RCDs (safety switches), overcrowded circuits, or outdated ceramic fuses. Common in pre-2000 Perth and Sydney homes that have not been upgraded.