Defect type
·14 observations
High · 3–4/5
Faulty/Loose GPO
Faulty/Loose GPO is a high-severity electrical defect SURE inspectors have documented across 14 inspection reports.
Causes
- Improper installation or loose mounting screws.
- Loose mounting screws
- Inadequate fastening
- Faulty installation
- Lack of maintenance
Symptoms to look for
- The GPO feels wobbly or is visibly loose from the wall.
- The GPO is not functioning correctly or not at all
- Electrical outlet not securely fixed to the wall
- GPO is not functioning correctly or is damaged
- Power point moving when plugged in or touched
Remedies
- Secure the loose GPO, engaging a licensed electrician if necessary for safe repair.
- Securely re-fasten the loose GPO in WC 1 by a qualified electrician
- Rectify the faulty GPO by a qualified electrician
- Engage a qualified electrician for repairs
- Engage a licensed electrician for repairs
Critical
Get an inspector through this property.
Findings in this category skew high severity. If you are under contract, we can usually book inside the cooling-off window. Every inspection includes 12 months of free advice.
Inspector-written
Curated entries in Electrical
- Curated 3–5/5Exposed Electrical Wiring in Accessible Area
Electrical wiring not properly enclosed in conduit or behind wall linings in areas accessible to occupants, including subfloor spaces, garages, and laundries. Presents shock hazard and does not comply with AS/NZS 3000 wiring rules.
- Curated 2–5/5Non-Compliant or Overloaded Switchboard
Switchboard not meeting current AS/NZS 3000 requirements, including missing RCDs (safety switches), overcrowded circuits, or outdated ceramic fuses. Common in pre-2000 Perth and Sydney homes that have not been upgraded.
Same category