Improper Power Supply for Hot Water Unit
Improper Power Supply for Hot Water Unit is a moderate-severity electrical defect SURE inspectors have documented across 3 inspection reports.
Causes
- Incorrect power point installation for outdoor environment
- Improper electrical installation.
- Improper installation
- Inadequate protection
Symptoms to look for
- Use of an extension lead for hot water unit power supply.
- Taped power point
- Non-water tight power point
- Unsecured power point
Remedies
- Engage a registered electrician to replace with a suitable exterior power point
- Engage an electrician to install an external power point.
- Secure and make power point water tight
Worth asking our inspector about this specifically.
This is common across Perth stock and usually fixable without drama, but the scope of the fix varies. Every SURE inspection includes 12 months of free advice. Call out the defect by name and we check for it directly.
Curated entries in Electrical
- Curated 3–5/5Exposed Electrical Wiring in Accessible Area
Electrical wiring not properly enclosed in conduit or behind wall linings in areas accessible to occupants, including subfloor spaces, garages, and laundries. Presents shock hazard and does not comply with AS/NZS 3000 wiring rules.
- Curated 2–5/5Non-Compliant or Overloaded Switchboard
Switchboard not meeting current AS/NZS 3000 requirements, including missing RCDs (safety switches), overcrowded circuits, or outdated ceramic fuses. Common in pre-2000 Perth and Sydney homes that have not been upgraded.