Inactive External Power Point
Inactive External Power Point is a moderate-severity electrical defect SURE inspectors have documented across 4 inspection reports.
Causes
- Omission during electrical fit-out
- Damaged internal components
- Circuit breaker tripped
- Not yet commissioned
- Electrical fault
Symptoms to look for
- Power point does not supply electricity when tested
- Absence of an expected electrical power point
- Power point not functioning correctly
- Power tripped upon testing
Remedies
- Ensure electrical system is fully commissioned by a qualified electrician
- Engage a licensed electrician for repairs
- Install the external power point
- Repair or replace power point
- Check circuit breaker
Worth asking our inspector about this specifically.
This is common across Perth stock and usually fixable without drama, but the scope of the fix varies. Every SURE inspection includes 12 months of free advice. Call out the defect by name and we check for it directly.
Curated entries in Electrical
- Curated 3–5/5Exposed Electrical Wiring in Accessible Area
Electrical wiring not properly enclosed in conduit or behind wall linings in areas accessible to occupants, including subfloor spaces, garages, and laundries. Presents shock hazard and does not comply with AS/NZS 3000 wiring rules.
- Curated 2–5/5Non-Compliant or Overloaded Switchboard
Switchboard not meeting current AS/NZS 3000 requirements, including missing RCDs (safety switches), overcrowded circuits, or outdated ceramic fuses. Common in pre-2000 Perth and Sydney homes that have not been upgraded.