Skip to content
Defect type ·23 observations
High · 2–4/5

Incomplete Garage Ceiling Electrical Work

Electrical/real

Incomplete Garage Ceiling Electrical Work is a high-severity electrical defect SURE inspectors have documented across 23 inspection reports.

Causes

  • Not explicitly mentioned in the report (likely incomplete installation).
  • Fit-off and commissioning stage not yet finalized by contractor
  • Incomplete scheduled electrical works
  • Incomplete construction/installation
  • Not completed during construction.

Symptoms to look for

  • Ceiling electrical components (e.g., lights, exhaust fans) in the Ensuite are not fully installed or connected
  • Electrical fittings, outlets, or connections in the roof void are missing or not yet installed/tested
  • Electrical components in the alfresco area are not fully installed or connected
  • External electrical components are not fully installed or connected
  • Internal electrical components are not fully installed or connected

Remedies

  • Complete all final fit-off and commissioning for the roof electrical system in accordance with design and relevant standards.
  • Complete all necessary electrical installations in the bedroom ceilings
  • Re-inspect the conduit at final inspection to ensure completion
  • Complete unfinished wall sections and electrical installations
  • Complete electrical fit-off in Bathroom 2 - Ensuite ceiling
Critical

Get an inspector through this property.

Findings in this category skew high severity. If you are under contract, we can usually book inside the cooling-off window. Every inspection includes 12 months of free advice.

Inspector-written

Curated entries in Electrical

All entries →
  • Curated 3–5/5
    Exposed Electrical Wiring in Accessible Area

    Electrical wiring not properly enclosed in conduit or behind wall linings in areas accessible to occupants, including subfloor spaces, garages, and laundries. Presents shock hazard and does not comply with AS/NZS 3000 wiring rules.

  • Curated 2–5/5
    Non-Compliant or Overloaded Switchboard

    Switchboard not meeting current AS/NZS 3000 requirements, including missing RCDs (safety switches), overcrowded circuits, or outdated ceramic fuses. Common in pre-2000 Perth and Sydney homes that have not been upgraded.

Same category

More from Electrical

All entries →
9,237 inspections
242,618 defects found
30,388 defect types
Local franchise owners
Head office backing

Built to last. Inspected to be SURE.

One inspection, twelve months of advice, and the same person on the other end of the phone every time you call. That is the part you do not see on the brochure.

Same-day reports (subject to access and availability) 12 months free advice Your inspector reads every report
Start my quote
Or call 1300 787 327 business hours support

9,237 inspections · 242,618 defects found · Inspector-owned franchises