Loose Electrical Earth Point and Mains Housing
Loose Electrical Earth Point and Mains Housing is a cosmetic electrical defect SURE inspectors have documented across 1 inspection report.
Causes
- Inadequate fixings during installation or deterioration of temporary sealant (silicone) over time.
Symptoms to look for
- Housing on electrical earth point and mains has come loose
- Silicone fixing is inadequate
Remedies
- Secure with adequate fixings and seal
Include this check in your next inspection.
Typically a low-severity finding, but worth documenting before maintenance work. Every SURE inspection includes 12 months of free advice.
Curated entries in Electrical
- Curated 3–5/5Exposed Electrical Wiring in Accessible Area
Electrical wiring not properly enclosed in conduit or behind wall linings in areas accessible to occupants, including subfloor spaces, garages, and laundries. Presents shock hazard and does not comply with AS/NZS 3000 wiring rules.
- Curated 2–5/5Non-Compliant or Overloaded Switchboard
Switchboard not meeting current AS/NZS 3000 requirements, including missing RCDs (safety switches), overcrowded circuits, or outdated ceramic fuses. Common in pre-2000 Perth and Sydney homes that have not been upgraded.