Loose Electrical Wiring in Roof Void
Loose Electrical Wiring in Roof Void is a critical electrical defect SURE inspectors have documented across 13 inspection reports.
Causes
- Substandard electrical installation or repairs
- Non-compliant electrical installation
- Environmental factors in roof void
- Improper electrical installation
- Improper installation
Symptoms to look for
- Untradesmanlike electrical work visible near insulation
- Electrical cable loose or unpinned to roof beams
- Visible electrical wires unpinned in roof cavity
- Un-boxed electrical joins
- Deteriorated insulation
Remedies
- Engage a qualified electrician for inspection and to secure wiring according to compliance standards
- Strongly recommend an electrician inspect and repair before any entry or other works are completed.
- Engage an electrician for inspection and correction
- Secure electrical cable according to AS standard
- Contact a licensed electrician for repairs
Get an inspector through this property.
Findings in this category skew high severity. If you are under contract, we can usually book inside the cooling-off window. Every inspection includes 12 months of free advice.
Curated entries in Electrical
- Curated 3–5/5Exposed Electrical Wiring in Accessible Area
Electrical wiring not properly enclosed in conduit or behind wall linings in areas accessible to occupants, including subfloor spaces, garages, and laundries. Presents shock hazard and does not comply with AS/NZS 3000 wiring rules.
- Curated 2–5/5Non-Compliant or Overloaded Switchboard
Switchboard not meeting current AS/NZS 3000 requirements, including missing RCDs (safety switches), overcrowded circuits, or outdated ceramic fuses. Common in pre-2000 Perth and Sydney homes that have not been upgraded.