Skip to content
Defect type ·47 observations
Moderate · 1–3/5

Missing Globe for External Light

Electrical/real

Missing Globe for External Light is a moderate-severity electrical defect SURE inspectors have documented across 47 inspection reports. Highest concentration in Jindalee.

Causes

  • Globe never installed or replaced after removal
  • Not installed during construction/handover
  • Globe not installed during construction
  • Light globe has blown and been removed
  • Oversight by builder or electrician

Symptoms to look for

  • External light fittings are present but do not illuminate
  • External light cannot be confirmed as functional
  • Absence of a light globe in the garage fitting
  • Visible empty socket where globe should be
  • Non-functional light due to missing bulb

Remedies

  • Install an appropriate light globe in the garage light fitting
  • Install appropriate light bulbs in all external light fittings
  • Install a globe in the external light and test its operation
  • Install an appropriate globe to the external light fixture
  • Install a new light globe to restore functionality
Inspection geography

Where we see this most

These suburbs show the highest concentration of missing globe for external light in our inspection data (minimum five observations). Click a suburb to see its full defect profile.

Suburb
Reports
Share
Avg sev
Jindalee
5
0.1%
2.00
Baldivis
5
0.1%
2.00
Moderate

Worth asking our inspector about this specifically.

This is common across Perth stock and usually fixable without drama, but the scope of the fix varies. Every SURE inspection includes 12 months of free advice. Call out the defect by name and we check for it directly.

Inspector-written

Curated entries in Electrical

All entries →
  • Curated 3–5/5
    Exposed Electrical Wiring in Accessible Area

    Electrical wiring not properly enclosed in conduit or behind wall linings in areas accessible to occupants, including subfloor spaces, garages, and laundries. Presents shock hazard and does not comply with AS/NZS 3000 wiring rules.

  • Curated 2–5/5
    Non-Compliant or Overloaded Switchboard

    Switchboard not meeting current AS/NZS 3000 requirements, including missing RCDs (safety switches), overcrowded circuits, or outdated ceramic fuses. Common in pre-2000 Perth and Sydney homes that have not been upgraded.

Same category

More from Electrical

All entries →
9,237 inspections
242,618 defects found
30,388 defect types
Local franchise owners
Head office backing

Built to last. Inspected to be SURE.

One inspection, twelve months of advice, and the same person on the other end of the phone every time you call. That is the part you do not see on the brochure.

Same-day reports (subject to access and availability) 12 months free advice Your inspector reads every report
Start my quote
Or call 1300 787 327 business hours support

9,237 inspections · 242,618 defects found · Inspector-owned franchises