Missing Switch Cover Plates in Powder Room
Missing Switch Cover Plates in Powder Room is a high-severity electrical defect SURE inspectors have documented across 25 inspection reports.
Causes
- Omission during electrical installation.
- Oversight or unfinished electrical work.
- Incomplete electrical fit-out.
- Missing component
- Lost or removed
Symptoms to look for
- Exposed wiring or openings where covers should be.
- Open electrical point or junction box
- External wall night cover missing
- Exposed electrical switches.
- Exposed wall mounted socket
Remedies
- Install switch covers around the sink and joinery area of the second-floor kitchen.
- Install switch cover plates in the second floor kitchen.
- Install switch cover plates in the powder room.
- Engage a licensed electrician for replacement
- Engage an electrician for repairs/replacement
Get an inspector through this property.
Findings in this category skew high severity. If you are under contract, we can usually book inside the cooling-off window. Every inspection includes 12 months of free advice.
Curated entries in Electrical
- Curated 3–5/5Exposed Electrical Wiring in Accessible Area
Electrical wiring not properly enclosed in conduit or behind wall linings in areas accessible to occupants, including subfloor spaces, garages, and laundries. Presents shock hazard and does not comply with AS/NZS 3000 wiring rules.
- Curated 2–5/5Non-Compliant or Overloaded Switchboard
Switchboard not meeting current AS/NZS 3000 requirements, including missing RCDs (safety switches), overcrowded circuits, or outdated ceramic fuses. Common in pre-2000 Perth and Sydney homes that have not been upgraded.