Defect type
·2 observations
Critical · 4–5/5
Non-Compliant Oven Power Supply
Non-Compliant Oven Power Supply is a critical electrical defect SURE inspectors have documented across 2 inspection reports.
Causes
- Incorrect original installation of power outlet location
- Non-compliance with electrical safety standards
- Insufficient power outlet for the appliance
- Unlicensed electrical work
Symptoms to look for
- Power supply to oven requires inspection by licensed electrician
- Cooktop connected via a domestic extension lead
Remedies
- Contact a licensed electrician for inspection and where required repairs to installation work completed
- Engage a licensed electrician to provide a compliant permanent power connection for the cooktop
- Remove the extension lead
Critical
Get an inspector through this property.
Findings in this category skew high severity. If you are under contract, we can usually book inside the cooling-off window. Every inspection includes 12 months of free advice.
Inspector-written
Curated entries in Electrical
- Curated 3–5/5Exposed Electrical Wiring in Accessible Area
Electrical wiring not properly enclosed in conduit or behind wall linings in areas accessible to occupants, including subfloor spaces, garages, and laundries. Presents shock hazard and does not comply with AS/NZS 3000 wiring rules.
- Curated 2–5/5Non-Compliant or Overloaded Switchboard
Switchboard not meeting current AS/NZS 3000 requirements, including missing RCDs (safety switches), overcrowded circuits, or outdated ceramic fuses. Common in pre-2000 Perth and Sydney homes that have not been upgraded.
Same category