Smoke Alarm Not Connected to Power
Smoke Alarm Not Connected to Power is a critical electrical defect SURE inspectors have documented across 4 inspection reports.
Causes
- No power available to the property
- Improper installation or wiring
- Scope of inspection limitations
- Battery issue
- Disconnection
Symptoms to look for
- Smoke alarm not showing connected to power
- Smoke alarms not connected to power
- Smoke alarm functionality unknown
Remedies
- Engage a licensed electrician to test and certify the smoke alarm before settlement
- Check with local council regarding type, locations, and other related requirements
- Have a licensed electrician assess and connect/install as per standards
- Check with local council regarding type, locations and requirements
- Rectify power connection
Get an inspector through this property.
Findings in this category skew high severity. If you are under contract, we can usually book inside the cooling-off window. Every inspection includes 12 months of free advice.
Curated entries in Electrical
- Curated 3–5/5Exposed Electrical Wiring in Accessible Area
Electrical wiring not properly enclosed in conduit or behind wall linings in areas accessible to occupants, including subfloor spaces, garages, and laundries. Presents shock hazard and does not comply with AS/NZS 3000 wiring rules.
- Curated 2–5/5Non-Compliant or Overloaded Switchboard
Switchboard not meeting current AS/NZS 3000 requirements, including missing RCDs (safety switches), overcrowded circuits, or outdated ceramic fuses. Common in pre-2000 Perth and Sydney homes that have not been upgraded.