Unsafe Foil Insulation in Roof Void
Unsafe Foil Insulation in Roof Void is a critical electrical defect SURE inspectors have documented across 59 inspection reports.
Causes
- Presence of foil insulation (potential electrical hazard if not properly installed/protected with electrical wiring)
- Installation of foil insulation in a manner that creates electrical safety risks
- Potential electrical hazards when combined with moisture or contact with wiring
- Presence of conductive foil insulation near electrical wiring
- Safety concerns with foil insulation and electrical hazards
Symptoms to look for
- Inspector will not enter the roof space with foil insulation due to safety
- Presence of foil insulation in the roof void, deemed unsafe for access
- Risk of electrical shock if wiring is exposed or damaged near foil
- Inspector's refusal to enter roof space due to safety concerns
- Inability to enter roof void due to foil insulation
Remedies
- A qualified electrician should be engaged for advice and recommendations regarding the safety of foil insulation in relation to electrical wiring
- A qualified electrician should be engaged for advice and recommendations regarding the safety of the insulation and electrical systems
- Engage a qualified electrician for advice and recommendations regarding safe assessment or remediation of the foil insulation
- Engage a qualified electrician for advice and recommendations regarding safety/access with foil insulation
- Engage a qualified electrician for advice and recommendations regarding the safety of the foil insulation
Get an inspector through this property.
Findings in this category skew high severity. If you are under contract, we can usually book inside the cooling-off window. Every inspection includes 12 months of free advice.
Curated entries in Electrical
- Curated 3–5/5Exposed Electrical Wiring in Accessible Area
Electrical wiring not properly enclosed in conduit or behind wall linings in areas accessible to occupants, including subfloor spaces, garages, and laundries. Presents shock hazard and does not comply with AS/NZS 3000 wiring rules.
- Curated 2–5/5Non-Compliant or Overloaded Switchboard
Switchboard not meeting current AS/NZS 3000 requirements, including missing RCDs (safety switches), overcrowded circuits, or outdated ceramic fuses. Common in pre-2000 Perth and Sydney homes that have not been upgraded.