Hallway/s Light Not Operating
Hallway/s Light Not Operating is a moderate-severity electrical defect SURE inspectors have documented across 61 inspection reports. Highest concentration in Ellenbrook.
Causes
- Underlying electrical issue
- Defective light fixture
- Incorrect installation
- Electrical fault
- Electrical issue
Symptoms to look for
- Light does not turn on or functions improperly
- Light fixture does not illuminate
- Light fixture not illuminating
- Light fixture not turning on
- Light/fan not operating
Remedies
- Inspect and repair or replace faulty light fixture/components
- If failure continues, engage an electrician for repairs
- Engage an electrician for repairs if failure continues
- Inspect and rectify the Entry/Foyer ceiling light
- Inspect and rectify the Hallway/s ceiling light
Where we see this most
These suburbs show the highest concentration of hallway/s light not operating in our inspection data (minimum five observations). Click a suburb to see its full defect profile.
Worth asking our inspector about this specifically.
This is common across Perth stock and usually fixable without drama, but the scope of the fix varies. Every SURE inspection includes 12 months of free advice. Call out the defect by name and we check for it directly.
Curated entries in Electrical
- Curated 3–5/5Exposed Electrical Wiring in Accessible Area
Electrical wiring not properly enclosed in conduit or behind wall linings in areas accessible to occupants, including subfloor spaces, garages, and laundries. Presents shock hazard and does not comply with AS/NZS 3000 wiring rules.
- Curated 2–5/5Non-Compliant or Overloaded Switchboard
Switchboard not meeting current AS/NZS 3000 requirements, including missing RCDs (safety switches), overcrowded circuits, or outdated ceramic fuses. Common in pre-2000 Perth and Sydney homes that have not been upgraded.