Missing Light Bulb (Entry)
Missing Light Bulb (Entry) is a moderate-severity electrical defect SURE inspectors have documented across 62 inspection reports. Highest concentration in Ellenbrook.
Causes
- Incomplete electrical fitting
- Oversight during handover
- Missing light bulbs.
- Burned out bulb
- Removed bulb
Symptoms to look for
- Garage ceiling light does not function due to missing bulb
- Exterior lights do not function due to missing bulbs
- Lights not turning on
- Missing light bulb
- Light does not illuminate when switched on
Remedies
- Install light bulbs in all exterior lighting fixtures
- Install a light bulb in the garage ceiling fixture
- Engage an electrician if operation fails to occur
- Install light bulbs
- Replace light bulb
Where we see this most
These suburbs show the highest concentration of missing light bulb (entry) in our inspection data (minimum five observations). Click a suburb to see its full defect profile.
Worth asking our inspector about this specifically.
This is common across Perth stock and usually fixable without drama, but the scope of the fix varies. Every SURE inspection includes 12 months of free advice. Call out the defect by name and we check for it directly.
Curated entries in Electrical
- Curated 3–5/5Exposed Electrical Wiring in Accessible Area
Electrical wiring not properly enclosed in conduit or behind wall linings in areas accessible to occupants, including subfloor spaces, garages, and laundries. Presents shock hazard and does not comply with AS/NZS 3000 wiring rules.
- Curated 2–5/5Non-Compliant or Overloaded Switchboard
Switchboard not meeting current AS/NZS 3000 requirements, including missing RCDs (safety switches), overcrowded circuits, or outdated ceramic fuses. Common in pre-2000 Perth and Sydney homes that have not been upgraded.