Unverified Electrical System
Unverified Electrical System is a high-severity electrical defect SURE inspectors have documented across 108 inspection reports. Highest concentration in Alkimos.
Causes
- Limitations of the general building inspection scope (does not cover electrical systems)
- Standard inspection limitation (inspector does not certify electrical systems)
- Scope limitation of building inspection report
- Scope limitation of current inspection
- Scope limitation of the inspection
Symptoms to look for
- Unknown safety or functional condition of electrical wiring and components
- No certification for electrical wiring or safety was performed
- Unknown safety or compliance status of the electrical system
- Electrical system functionality and safety not assessed
- Lack of certified electrical assessment
Remedies
- Ensure RCDs (Residual Current Devices) and smoke alarms are certified by a qualified electrician BEFORE settlement
- Engage a licensed electrician to assess all electrical wiring and components for safety and compliance
- Have all electrical wiring and components assessed by a licensed electrician
- Have an electrical report carried out by a suitably qualified contractor
- Have all electrical wiring and components assessed by a licensed electrician.
Where we see this most
These suburbs show the highest concentration of unverified electrical system in our inspection data (minimum five observations). Click a suburb to see its full defect profile.
Get an inspector through this property.
Findings in this category skew high severity. If you are under contract, we can usually book inside the cooling-off window. Every inspection includes 12 months of free advice.
Curated entries in Electrical
- Curated 3–5/5Exposed Electrical Wiring in Accessible Area
Electrical wiring not properly enclosed in conduit or behind wall linings in areas accessible to occupants, including subfloor spaces, garages, and laundries. Presents shock hazard and does not comply with AS/NZS 3000 wiring rules.
- Curated 2–5/5Non-Compliant or Overloaded Switchboard
Switchboard not meeting current AS/NZS 3000 requirements, including missing RCDs (safety switches), overcrowded circuits, or outdated ceramic fuses. Common in pre-2000 Perth and Sydney homes that have not been upgraded.